-
Century’s Bleed Thru Marker
Century’s Bleed Thru Marker is a permanent industrial grade valve action paint marker for construction purpose. The unique ink formulation enables the markings to bleed thru and be visible even after painting over the surface that has been marked. It is made up of a hard aluminum body filled with ink and felt-tip with valve action for smooth ink flow. It works on all surfaces like metals, concrete, iron, alloys, plastic, glass etc. The marker is available in two types for oil based primers and water based primers. It is widely used in construction industry, ship building and bridge fabrication on metals & alloys for Used for inspection, coding, layout or assembly operations.
Tip Size: Chisel Tip 5 mm
-
Century’s Cold Marking Chalk
Century’s Cold Marking Chalk is industrial grade chalk for marking on any surface. The chalk has an ergonomic design which makes it easy to hold & write. It can mark on any surface like glass, metal, plastic, concrete, paper, rubber, wood etc. The markings made are bright, fade proof & water-proof. They won’t not chip or peel off easily & are UV resistant. The formulation has a superior marking performance compared to other chalks and works on oily, greasy, smooth, cold, rough & even wet surfaces.
-
Century’s Fine Tip Metal Marker
Century’s Fine-tip metal marker is a permanent marker for making bright, opaque and fade-proof markings on any surface. The unique stainless steel fine tip makes it very easy to mark on smaller objects & places which are difficult to mark with regular broad tip markers. The marker has a hard aluminum body filled with ink & a rubber valve at the bottom, when pumped slightly pushes ink towards a fine ball point for sharp markings. The markings made by the marker wont chip/peel/fade or rub off and it can withstand heat and weathering under adverse conditions. It has special viscous ink formulation similar to paint which remains permanent on steel, alloys, metals, concrete, glass, rubber, wood & even plastics. It can mark on wet, dry, dusty, oily, greasy & even extremely rough surfaces with ease.
Tip Size: 2mm
-
Century’s Galvanizer Paint Marker
Century’s Galvanizer Paint Marker is an industrial grade valve action paint marker for any surface. The ink is formulated specially for galvanizing process. Once the steel has gone through the pickling process, the painted marks are removed along with the rusty steel leaving a bare surface ready for galvanizing. It’s Necessary tool in galvanising steel manufacturing. It is made up of a plastic body filled with ink and felt-tip with valve action for smooth ink flow. It’s Permanent, Bright, fade proof & weatherproof marking on all surfaces. This special pen is Non corrosive, Fast drying & xylene free formula. The marker works on all porous & non-porous surfaces including metal, glass, ceramic, wood, plastic, rough, smooth etc.
Tip Size: Point 2. 2.3mm Marking
-
Century’s High Temperature Marker
Century’s High temperature marker is an industrial grade valve action paint marker for any surface. The ink is formulated specially for marking surfaces & objects that are exposed to very high temperature & harsh environments. It is made up of a hard aluminum body filled with ink and felt-tip with valve action for smooth ink flow. The markings have to be made at room temperature & works on all kinds of surfaces including steel, metals, ceramic, glass, rubber, concrete, alloys, wood etc. The markings made by the marker remain permanent at high temperatures up to 500-1093 degrees Celsius (930-2000 F) depending on the colour. The marker works on all porous & non-porous surfaces including metal, glass, ceramic, wood, plastic, rough, smooth etc. Ideal for Iron & steel, Automobile, Welding, Ceramic & Glass manufacturers.
Tip Size: 2mm
-
Century’s Hot Marking Chalk
Century’s Hot Marking Chalk is a unique tool to mark onto red hot surfaces. It is widely used in industrial applications for coding & identification purposes. It makes very clear & bright markings on all kinds of metals, alloys, steel etc. and remains permanent up to 1400 degree Celsius (2500 F). The markings don’t fade, char, peel or drip away from the surface. They can work on any kind of surface rough, scraped; smooth etc. The advantage of the chalk over other markers or chalks is that the marker can be used when the surface temperature of the object is very high. These chalks are used for marking metals for laser cutting, instant and inflatable markings at varied temperatures, rough surfaces of steel castings, metal forgings, stainless steel sheets, metal plates, concrete slabs, Stripped & Rolled Items, Ingots Billets etc.
-
Century’s Metal Marker Tube
Century’s Tube Type Metal Marker is a unique marking device for permanent & fade-proof marking on any surface. Its an industrial grade ball-point marker which are bright, opaque & weather-proof. The markings made by the marker wont chip/peel/fade or rub off and it can withstand heat and weathering under adverse conditions. It has special viscous ink formulation similar to paint which remains permanent on steel, alloys, metals, concrete, glass, rubber, wood & even plastics. It can mark on wet, dry, dusty, oily, greasy & even extremely rough surfaces with ease. Its made of up of an aluminum tube filled with ink for making smooth and neat markings on any surface. The marker can also write under water.
Everon Marker is designed whereby it can be used up to last drop of ink when compared to traditional tube type markers where almost 20% of ink goes waste or we are unable to use after squeezing, as it is difficult to even hold the tube.
Tip Size: 2mm
-
Century’s Nuclear Grade Stainless Steel Marker
Century’s Stainless Steel Marker is an industrial grade valve action paint marker for all surfaces. It is made up of an aluminum body filled with ink & a felt-tip with valve action for smooth ink flow. The ink has very few traces of chloride, sulphur, low melting metals & halogens which won’t contaminate or scath the surface being marked. The ink formulation meets or exceeds the specifications for GE Nuclear Energy, GE Aircraft Engines and the US Energy Research and Development Administration (nuclear grade). It can mark on all surfaces including metal, plastics, steel, ceramic, glass, concrete etc. The markings do not fade or remove under adverse weather conditions & heat too. It is ideal for welding, aircraft industries, marine industries, power plants, automotive plants, and oil and natural gas refineries.
Tip Size: 2mm
-
Century’s Plastic Marker
Century’s Plastic Marker is a unique marking device for permanent & fade-proof marking on all kinds of surfaces. It’s a heavy duty marker with 2 mm ball-point tip. The tip is available in plastic & stainless steel. The heavy duty tip enables the marker to mark onto any surface without any damage or leakage compared to conventional felt tip markers. The viscous ink is specially formulated for bright & opaque markings & remains permanent even during harsh conditions & chemical aggressions. It is used to mark on woven sack bags, cartons, rolls, plastic drums, auto parts etc. The ink content is 60 ml & it’s available in collapsible aluminum tube.
Tip Size: 2mm
-
Century’s Pump type Metal Marker
Century’s Pump-type Metal Marker is unique marking device for permanent & fade-proof marking on any surface. Its an industrial grade ball-point marker which are bright, opaque & weather-proof. It has a rigid aluminum body making it difficult to break, puncture or leak. It also has a rubber valve at the bottom for smooth ink flow. When the valve is pumped it compresses ink towards a fine ball point for smooth flow and easy writing.
The markings made by the marker wont chip/peel/fade or rub off and it can withstand heat and weathering under adverse conditions. It has special viscous ink formulation similar to paint which remains permanent on steel, alloys, metals, concrete, glass, rubber, wood & even plastics. It can mark on wet, dry, dusty, oily, greasy & even extremely rough surfaces with ease.
Tip Size: 2mm
-
Century’s Textile Shrinkage Template
Dimensional stability is “ability of textile material to maintain or return to its original geometric configuration. Shrinkage is “width wise or length wise contraction of textiles material usually after wetting or drying or to an exposure to evaluated temperature.
Century’s Shrinkage template & Percentage Scale is Universal testing equipment to determine dimensional change after washing and dry-cleaning in all types of fabrics. This is applicable to all types of fabrics like woven, nonwoven, Cotton, Polyester, Nylon, Viscose, Velvet, Spandex, Silk, Satin, Wool, Linen, Leather, Canvas, Hosiery knitted & Gray fabrics. Shrinkage template used to determine directly the % dimensional change (shrinkage) in all types of fabrics.
-
Century’s UV Security Paint Marker
Century’s UV Security Marker is a felt tip paint marker with applications in wide range of industries including hospitality industry, hotel industry, manufacturing, security etc. Its marking are not visible in normal light & only visible in black light or ‘UV light’. It is made up of a hard aluminum body filled with ink and felt-tip with valve action for smooth ink flow. It is used in hotels & hospitals for quality checks and security markings. It is also used in manufacturing units, automobile industry, event industry, repair workshops, laundry, clubs, army etc. The markings made by the marker are permanent & weather-proof. It works on all porous & non-porous surfaces including metal, plastic, glass, ceramic, rubber and stone. The ink is xylene free. It is also known as invisible marker as the markings are not visible under normal daylight. The marker is very popular in Europe & America and widely used across all kind of sectors.
Tip Size: 2mm
Trending
