Advantages:• Viscous ink makes Permanent, Bright & Opaque Markings on all surfaces including metals, steel, glass, rubber, wood, concrete etc.
• Hard Aluminum body makes it difficult to break, puncture or leak compared to other tube markers. • Ergonomic size makes it very easy to put in a pocket & use anywhere likes a pen. • Rubber valve at bottom makes it very easy to use with continuous ink flow. Zero Wastage compared to Tube type markers. • Stainless steel tip with roller ball point enables easy & smooth markings on Wet, Oily, Dry, Greasy & Extremely Rough Surfaces. • 30 ml ink content (5-6 times of conventional fine tip paint markers) • Ideal for use in Welding, Metal Cutting, Automation Industry, Spare Parts, Ship Building, Construction, Dies & Moulds, Scrap, Oil & Gas Industry Pre-Cast Cement Sheets etc. |
Directions of Use:• Remove Cap. For cold start press the rubber ball/valve 4-5 times at the bottom for ink flow at the tip.
• Mark vertically at 90-degree angle & ensure the ball presses the surface for smooth ink flow. • As pressure reduces, press the rubber valve 2-3 times to continue writing. • Do not press the rubber bulb when not in use as it will lead to increase ink pressure. • Clean the tip & put the cap back on when after each use. |
Caution:• Harmful if swallowed or intentional inhalation.
• Avoid contact with eyes. Keep away from open flame. • Please test before use. |
Century’s Fine Tip Metal Marker
Century’s Fine-tip metal marker is a permanent marker for making bright, opaque and fade-proof markings on any surface. The unique stainless steel fine tip makes it very easy to mark on smaller objects & places which are difficult to mark with regular broad tip markers. The marker has a hard aluminum body filled with ink & a rubber valve at the bottom, when pumped slightly pushes ink towards a fine ball point for sharp markings. The markings made by the marker wont chip/peel/fade or rub off and it can withstand heat and weathering under adverse conditions. It has special viscous ink formulation similar to paint which remains permanent on steel, alloys, metals, concrete, glass, rubber, wood & even plastics. It can mark on wet, dry, dusty, oily, greasy & even extremely rough surfaces with ease.
Tip Size: 2mm
Advantages: |
Directions of Use: |
Caution: |
| color | Blue, Green, Red, Yellow, Black, Orange, Pink, Violet, White |
|---|
Related products
-
Century’s Bleed Thru Marker
Century’s Bleed Thru Marker is a permanent industrial grade valve action paint marker for construction purpose. The unique ink formulation enables the markings to bleed thru and be visible even after painting over the surface that has been marked. It is made up of a hard aluminum body filled with ink and felt-tip with valve action for smooth ink flow. It works on all surfaces like metals, concrete, iron, alloys, plastic, glass etc. The marker is available in two types for oil based primers and water based primers. It is widely used in construction industry, ship building and bridge fabrication on metals & alloys for Used for inspection, coding, layout or assembly operations.
Tip Size: Chisel Tip 5 mm
-
Century’s Everon Marker
Century’s Everon Marker is a unique marking device used in textile mills & factories for permanent marking on gray cloth & fabrics. It has a rigid aluminum body making it difficult to break, puncture or leak. It also has a rubber valve at the bottom for smooth ink flow. When the valve is pumped it compresses ink towards a fine ball point for smooth flow and easy writing. It is also known as ‘pump-type marker’ or ‘TEXPEN’. The viscous ink makes permanent, bright & opaque markings on all kinds of fabrics and remains visible even after the dyeing & other finishing processes. It works on all kinds of fabrics like cotton, denim, polyester, wool, silk, linen etc. It is widely used in dyeing houses & textile mills in processes like dyeing, scouring, bleaching, hosiery, knitting & weaving.
Everon Marker is designed whereby it can be used up to last drop of ink when compared to traditional tube type markers where almost 20% of ink goes waste or we are unable to use after squeezing, as it is difficult to even hold the tube.
Tip Size: 2mm
-
Century’s Nuclear Grade Stainless Steel Marker
Century’s Stainless Steel Marker is an industrial grade valve action paint marker for all surfaces. It is made up of an aluminum body filled with ink & a felt-tip with valve action for smooth ink flow. The ink has very few traces of chloride, sulphur, low melting metals & halogens which won’t contaminate or scath the surface being marked. The ink formulation meets or exceeds the specifications for GE Nuclear Energy, GE Aircraft Engines and the US Energy Research and Development Administration (nuclear grade). It can mark on all surfaces including metal, plastics, steel, ceramic, glass, concrete etc. The markings do not fade or remove under adverse weather conditions & heat too. It is ideal for welding, aircraft industries, marine industries, power plants, automotive plants, and oil and natural gas refineries.
Tip Size: 2mm
-
Century’s Tamper Check Paste
Century’s Tamper Check Marker is a unique device with special paste formulation for identification of vibratory loosening or tampering in nuts, bolts, fasteners, Joints and assemblies. Highly visible fluorescent Colours & Excellent adhesion as well as safe on metal & all other surfaces. Tamper Check also provides warranty protection against tampering. Marks will be easily broken if parts are tampered with or become loose. High visibly paste for a fast and easy visual check security indicator or tamper-evident seal on assemblies facilitating detection of any accidental or malicious adjustment Movement. Provides a Convenient visual method for identification of vibratory loosening or tempering on nuts, bolts, Fasteners, and assemblies. It’s also called Tamper proof marking or Torque marking paste.
Tip Size: Point 2. 2.3mm Marking
