Advantages:• Bright & Opaque markings on all kinds of fabrics including cotton, denims, polyester, wool etc.
• Permanent, Heat-Proof, Quick drying & No bleeding. • Resistance to Acids, Alkalis & other chemical aggressions in finishing processes. • Markings can withstand all textile sorting / sizing and finishing processes. • Quick identification of lots upon fabrics dyed in dark shades also. • Most economical method of marking on gray fabrics before processing. • Available in 3 ball-point sizes for different types of fabrics • Ink content: 60 ml (70g) • Key provided to squeeze out the ink from the marker for optimum utilization & smooth flow. |
Directions of Use:• Open cap.
• Insert the aluminum key provided with the marker at the bottom end of the tube & start rolling upwards for pressure. • Mark on a 90-degree angle for smooth ink flow. Keep rolling the key as pressure reduces. • Do not fold the tube back & forth as it could lead to puncture. • Do not use on surfaces other than fabrics. • Put the cap back on after use. |
Century’s Tex Marker
Century’s Tex Marker is a collapsible aluminum writing device filled with ink used for marking on fabric samples for identification. It is used by textile mills & processing houses before dyeing and finishing processes of grey fabric for identification, quality control, shrinkage, pilferage etc. The marking remain permanent, bright & opaque even after the dyeing & finishing processes are completed. It is widely used in textile industry for dyeing, bleaching, hosiery, knitting, scouring & weaving processes.
Tip Size: 2mm
Advantages: |
Directions of Use: |
| color | Red, Yellow, Black, Orange, Pink, Violet, White |
|---|
Related products
-
Century’s Cold Marking Chalk
Century’s Cold Marking Chalk is industrial grade chalk for marking on any surface. The chalk has an ergonomic design which makes it easy to hold & write. It can mark on any surface like glass, metal, plastic, concrete, paper, rubber, wood etc. The markings made are bright, fade proof & water-proof. They won’t not chip or peel off easily & are UV resistant. The formulation has a superior marking performance compared to other chalks and works on oily, greasy, smooth, cold, rough & even wet surfaces.
-
Century’s Everon Pen
Century’s Plastic Marker is a unique marking device for permanent & fade-proof marking on all kinds of surfaces. It’s a heavy duty marker with 2 mm ball-point tip. The tip is available in plastic & stainless steel. The heavy duty tip enables the marker to mark onto any surface without any damage or leakage compared to conventional felt tip markers. The viscous ink is specially formulated for bright & opaque markings & remains permanent even during harsh conditions & chemical aggressions. It is used to mark on woven sack bags, cartons, rolls, plastic drums, auto parts etc. The ink content is 60 ml & it’s available in collapsible aluminum tube.
Tip Size: 2mm
-
Century’s Nuclear Grade Stainless Steel Marker
Century’s Stainless Steel Marker is an industrial grade valve action paint marker for all surfaces. It is made up of an aluminum body filled with ink & a felt-tip with valve action for smooth ink flow. The ink has very few traces of chloride, sulphur, low melting metals & halogens which won’t contaminate or scath the surface being marked. The ink formulation meets or exceeds the specifications for GE Nuclear Energy, GE Aircraft Engines and the US Energy Research and Development Administration (nuclear grade). It can mark on all surfaces including metal, plastics, steel, ceramic, glass, concrete etc. The markings do not fade or remove under adverse weather conditions & heat too. It is ideal for welding, aircraft industries, marine industries, power plants, automotive plants, and oil and natural gas refineries.
Tip Size: 2mm
-
Century’s Everon Marker
Century’s Everon Marker is a unique marking device used in textile mills & factories for permanent marking on gray cloth & fabrics. It has a rigid aluminum body making it difficult to break, puncture or leak. It also has a rubber valve at the bottom for smooth ink flow. When the valve is pumped it compresses ink towards a fine ball point for smooth flow and easy writing. It is also known as ‘pump-type marker’ or ‘TEXPEN’. The viscous ink makes permanent, bright & opaque markings on all kinds of fabrics and remains visible even after the dyeing & other finishing processes. It works on all kinds of fabrics like cotton, denim, polyester, wool, silk, linen etc. It is widely used in dyeing houses & textile mills in processes like dyeing, scouring, bleaching, hosiery, knitting & weaving.
Everon Marker is designed whereby it can be used up to last drop of ink when compared to traditional tube type markers where almost 20% of ink goes waste or we are unable to use after squeezing, as it is difficult to even hold the tube.
Tip Size: 2mm
